Products
Lorem
Inno-MAT®
Lift–Turn Mechanism
The INNO-MAT® is a proprietary innovation from MIAM® GmbH and sets a new benchmark in the automation of metal seated, lift and turn plug valves. Its functionality is based on a sophisticated kinematic concept that lift the plug, turns and re-seats it by entirely dispensing the requirement for indexing balls commonly found in competitor systems — components that often cause wear, inaccuracy, or failure.
By transforming a simple rotational movement into a precise sequence of lifting, 90° turning, and lowering, the INNO-MAT® enables robust and efficient valve automation with just a single actuator — even under high differential pressures and in large valve sizes. This breakthrough makes reliable electric, pneumatic, or hydraulic actuation of metal seated, lift and turn plug valves achievable for the first time.
In addition to powering MIAM’s own INNO-CON® plug valve series, the INNO-MAT® is also used to retrofit valves from other leading manufacturers, including:
- Crane Pacific
- Ampo Poyam
- Schuf
A dedicated adapter system allows fast and straightforward installation on third-party valves, providing an easy upgrade path to modern, high-performance automation.
The INNO-MAT® mechanism ensures perfectly synchronized opening and closing times, supports high switching speeds, and delivers exceptional operational stability. Its mechanical design produces a lifting force that is 60% greater than the lowering force — a decisive advantage that prevents the plug from jamming in the seat due to thermal contraction.
The standard product range covers models from IM-3.5 (3.5 t lowering force) up to IM-100 (100 t lowering force), offering tailored solutions for a wide range of demanding applications.
Typical Applications
- Delayed Coker (DCU)
- Fluidized Catalyst Cracking (FCC)
- Vakuum-Destillation
- Ethylen Cracker
- Visbreaker
Typical Applications
- Delayed Coker (DCU)
- Fluidized Catalyst Cracking (FCC)
- Vakuum-Destillation
- Ethylen Cracker
- Visbreaker
INNO-MAT Lift and turn mechanism
Shipping INNO-MAT for retrofitting
MIAM INNO-CON liftplugs equipeed with INNO-MAT 30 (30 tons downforce)
Retrofit of Pacific Wedge plugs with INNO-MAT 100 (100 tons downforce)
Retrofit of Ampo Poyam Lift plugs with INNO-MAT 100 (100 tons downforce)
MakroPor
Die MakroPor Membranen besitzen Poren mit einem einheitlichen Porendurchmesser (Abweichung unter 5%), der über die gesamte Porenlänge hindurch konstant bleibt. Die Poren sind aufgrund der Vorstrukturierung über die gesamte Fläche des Wafers gleichmäßig exakt hexagonal oder quadratisch angeordnet. Durch eine zusätzliche anisotrope Ätzung können die runden Poren auch zu viereckigen aufgeweitet werden.
Standardprodukte
| Porenabstand | Porendurchmesser | Porenlänge | Anordnung der Poren |
|---|---|---|---|
| 1,5 µm | 1 µm | 50, 200 µm | Trigonal |
| 4,2 µm | 2,5 µm | 50, 200 µm | Trigonal |
| 12 µm | 5 µm | 350, 500 µm | Quadratisch |
| 20 µm | 8 µm | 500 µm | Quadratisch |
Material­eigenschaften
Porendurchmesser anpassbar ab 1 µm bis 17 µm(größer möglich)
Porenabstand und Anordnung der Poren anpassbar durch Anfertigung einer Photomaske zur Vorstrukturierung
Standardabweichung < 5%
Durchflussmembranen mit symmetrischen Poren
Poröses Silizium mit einseitig geschlossenen Poren
Porentiefen von wenigen µm bis 500 µm
Porosität einstellbar ab 20%
thermisch stabil bis 1200ºC
(abhängig von der Umgebung)
funktionalisierbare Oberfläche
Porendurchmesser
anpassbar ab 1 µm bis 17 µm (größer möglich)
Porenabstand und Anordnung der Poren
anpassbar durch Anfertigung einer Photomaske zur Vorstrukturierung
Standardabweichung
< 5%
Durchflussmembranen
mit symmetrischen Poren
Poröses Silizium
mit einseitig geschlossenen Poren
Porentiefen
wenige µm bis 500 µm
Porosität
einstellbar ab 20%
thermisch stabil
bis 1200ºC (abhängig von der Umgebung)